1-888-806-4356Email


The ArchDuke
Limited Edition Sword

(Two-Handed Sword)

The ArchDuke is inspired by the many examples of the two-handed swords carried by European knightss of the late 13th and 14th centuries.

The ArchDuke, like many other companions in the Next Generation Line, is not based on one single individual sword. Over the past few years Peter has made a special effort to document great swords of type XIIa and XIIIa during his research trips to museums and private collections.

Peter's impressions and the collected body of data has been the basis for this design. While the ArchDuke can be described as a generic example of its type, its handling characteristics, its heft and dynamic properties are like that of authentic well-preserved examples of the family.

It is big and massive, but has a smooth and appealing heft.

The hexagonal cross section of the blade is pretty common for the really big type XIIa and XIIIa swords of the late 13th and 14th centuries. Double fullers are less common but not unheard of.

Since we had a large type XIIIa blade developed for the 16th century two handers, it seemed such a waste not to offer a good high medieval "Grete Twa-hond Swerd" using that same blade.


The ArchDuke's blade design post-dates Oakeshott's typology range, which stops at the tapering multiple-fullered blades of Type XXII. Similar to the long examples of Type XX, XXI and XXII blades, the ArchDuke blade is long, double-edged and has two fullers, but has a very gradual profile taper and the fullers extend further down the blade.

A Limited Edition Hand Crafted Collectible Sword
This sword is offered in a limited edition of only 500 collectible swords worldwide.

Specifications
Overall length: 55” (140 cm)
Blade length: 41” (104 cm)
Blade width: 2.1875” (5.56 cm)
COG: 4.25” from guard (10.8 cm)
COP: 24” from guard (70 cm)

Weight: 5 lbs 6 oz (2.4 kilos)
Grip length: 11.25” (28.6 cm)
Guard Width: 10.25” (26 cm)


You can customize your sword's grip color -- see the standard grip colors here

The ArchDuke... $1,550

Reserve now before this limited edition collectible sword runs out!
Back to Albion Mark Swords Page
Sword design/specifications ©2003/2007 Peter Johnsson.
Albion Armorers International is the sole worldwide licensee for this product
Albion offers a maintenance plan to keep your Albion Mark swords like new. Click here for details


Albion Home Page

Site Map